Hobby Lobby Crafts Wooden Face Of A Clock​: Crafting Memories

A great approach to make durable and useful hobby lobby crafts wooden face of a clock. Since high-quality items tend to outlast their makers, why not create a solid wood turned clock that tells the time? I'll walk you through the process of making your own wooden clock using a lathe, some extra timber, and your imagination. Constructing a clock is a different approach from the typical turning tasks of pens, bowls, and peppermills, regardless of whether you consider yourself a master or are interested in taking up the craft as a hobby.

I adore all craft stores. However, there's something about Hobby Lobby Crafts Wooden Face Of A Clock that makes me feel so sad. I thus thought we might go shopping together today. I would want to share with you all of my favorite items that I have found at Hobby Lobby. You never want to miss these the next time. Hobby Lobby's finest of the best!

Recommended to read: Creative Craft Keywords That Start With C: Crafting Inspiration

How Can a Wooden Clock Be Made Step-by-Step?

The wooden clock was quite simple to make! These are the supplies and equipment required for the project.

• Supplies and Equipment
• Chalk Clock Kit with Hands Acrylic Paint: I used standard black and white paint from the craft shop.
• Jigsaw with a straight cutting bit and an orbital sander router

What Makes a Wooden Clock Turn?

• Infinite design options
• Useful art
• Fantastic gift suggestion

Top 7 Craft Supplies from Hobby Lobby for Clock Making

Step 1, choose a lumber

Think on the size you want your clock to be. The final decision is yours, and it may be influenced by the maximum lathe size, the size of the hour and minute hands on your clock kit, or the types of timber that are hobby lobby crafts wooden face of a clock. I loved the thickness and size of the lumber I had left over from a prior job.

My kit's minute hand was little less than 4.75 inches from the hole in the middle. This indicates that for these hands to move freely around a full circle, the inner diameter must be 9.5 inches.

You Must Read: DIY Large Outdoor Cage From Trampoline Net: Outdoor Living

Step 2: Get the wood blank ready

Determine the central width of your board with a ruler. The possible outside diameter of your clock may be estimated with the use of a compass. After positioning one end of the compass at your center point, you can modify its width to find a size that makes the most use of the board. As a visual aid, I even etched a line with the compass and then sketched over it with a pencil.

Take this time to decide how thick you want your clock's edge to be. This edge will encircle the clock's face like an elevated rim.

Step 3: Take Out the Corners

Remove any extra wood with your previously drawn lines until you have a rough circle-shaped piece.

Curves are easy to cut using a bandsaw. I sliced off each corner of my clock while staying just a little bit away from the line itself, following the outer border of its diameter.

You may install the complete square on the lathe or use a handsaw if you don't have a bandsaw. Although turning will take more effort, the end effect will be the same.

Step 4: Disentangle the Wood Blank

Now that the cutting is finished, you ought to have a circular blank prepared for the lathe.

You'll only need the center circle going forward, so throw away the other parts (or put them in your "cutoffs bin").

Step 5: Guide to Drill Depth

Drill into the middle of the wood blank with a handheld drill or a drill chuck (shown) until you reach the tape marker's edge.

This procedure is much easier with a drill chuck as all you have to do is switch on the lathe and gradually move the drill into the blank.

Read Also: Know More About Maricome Art Work Techniques

Step 6: Turn Inner Clock Face

Now that the outside border is finished and rounded, the clock face needs attention. If you'd like, you may now speed up your lathe. I set my clock at around 1200 rpm, but you should pick a pace that suits your comfort vintage clock face designs.

Now is the time to unleash your creativity. If you made one, stick to your plan. Otherwise, use the wood as a guide. In any case, this will be your clock's last appearance. You may construct anything sophisticated or keep things simple, but there are several important aspects to remember:

1. A wooden cylinder should remain in the middle. The middle clock shaft will be easier to conceal. Depending on the size of your clock kit, 3/4 inch should work.
2. Be mindful of the screw holes. At first, the holes created by attaching the faceplate chuck will be noticeable, but they may be eliminated by turning them away.

Step 7: Put the Clock Kit Together

It's time to put your kit together into a functional clock once your finish has dried and sealed.

It's crucial to adhere to the instructions that came with your particular clock kit. Typically, there are a few more parts to consider, including hanging brackets and washers.

Wood for the DIY Clock

You initially required a square piece of wood that was at least 20" broad (the clock's diameter) in order to construct our clock. Instead of using plywood, which could be readily cut to this size, we decided to utilize planks.

It would appear nicer and be of greater quality if boards were used.

Sketching and Cutting the Circle

This DIY wooden clock crafts was going to replace the old 20" diameter clock that was hanging on the wall. In order to create my circle, I traced the clock's contour.

To make your own clock, simply search the home for a round object that is almost the diameter you want (such as a plate, plant pot, or Crafting with wood clock faces).

Marking the Clock's Number Positions

I had to indicate the locations of the numbers on the board so that it could be turned into a clock.

I used a protractor to draw lines every 30 degrees after locating the circle's center and Hobby Lobby wood crafting essentials.

An hour on the clock dial was represented by each line. All of these lines were drawn on the clock's back, and I referred to them later while I was putting the clock numbers on.

Painting the Do-It-Yourself Clock

Painting the clock was the most difficult aspect of the job since I was unable to choose a color. Before I was happy with the color, I actually painted the clock three times.

I used acrylic paint from the craft shop for the real paint. Only the standard little paint bottles, which often cost fifty cents. I generally utilize what I have, although the larger bottles definitely would have worked better.

I really like using this paint since it was so simple to paint over if I changed my mind.

The Clock Numbers Are Drawn

At the store, I purchased a few chalk paint markers and paint pen markers. But none of them worked when I opened them at home, so I had to settle with what I had. And that was just ordinary hobby lobby crafts wooden face of a clock.

I attempted to position my numbers around the marks I had made on the back.

You May Also Like: What Are the Origins of Slovenian Painted Wooden Crafts?

FAQs: Hobby Lobby Crafts Wooden Face Of A Clock

How thick should a wood clock be?

The style and type of clock you want to manufacture will determine how thick the wood has to be. Smaller clocks may work well with thinner boards of around an inch, while bigger ornamental wall clocks often require thicker boards of up to two inches.

What is a clock face called?

Clock dial definitions: noun. the face of a clock that displays the day's hours and hobby lobby crafts wooden face of a clock. clock face as a synonym.

How do you make a clock face at home?

• Get your paper plate or cut out a circle of card with your youngster. This is the face of your clock.
• Place the numbers all over the face of the clock.
• Create the hands.
• Next, locate the circle's center point and use a sharp pencil or pair of scissors to create a small hole.

What shape is a clock face?

An analog clock is a circular-faced clock with two hands—one longer to measure minutes and one shorter to measure hours—with the digits one through twelve around the perimeter. A clock that just displays numbers to indicate the time is called a digital clock.